Our service is available on the EASY online ordering platform. As usual, EASY gives you access to the entire Dichtomatik catalogue portfolio.

Forward to ordering platform EASY


Product group: Piston seal
Design: NA asymmetrical u-ring with outer main sealing lip (28)
Profile no.: 28
Specification: E suitable for one-sided pressure load
Seal material: TPU 95 3401

Operational application limits
Pressure (MPa): ≤ 40
Temperature (°C): -40 to +100
Running speed (m/s): ≤ 0.5

Hydraulic oils acc. to DIN 51524 Part 1 – 3, lubricating oils, mineral oil based lubricating greases, highly non-flammable hydraulic fluids HFA, HFB, HFC acc. to VDMA 24317

The KNA28 u-ring is a single-acting piston seal with an asymmetrical design. Due to the synergy of geometry and material, it is particularly well-suited for extreme loads.

The KNA28 can be installed in cut grooves starting from an inner diameter of 25 mm with the use of suitable installation tools. With smaller diameters or larger profile widths, we recommend axially accessible installation housings.

Seals made of TPU are very robust and are particularly well-suited for applications in mobile hydraulics, particularly earth moving equipment.

Housing: Click here