Product group: Piston seal
Design: DS V-packing set
Profile no.: 01
Specification: E suitable for one-sided pressure load
Model: 1/0 combination of fabric and elastomer ring
Seal material: NBR fabric NBR F 90 3005
Support ring: NBR fabric
Pressure ring: POM
Operational application limits
Pressure (MPa): ≤ 40
Temperature (°C): -30 to +100
Running speed (m/s): ≤ 0.5
Hydraulic oils acc. to DIN 51524 Part 1 – 3, lubricating oils, mineral oil based lubricating greases, highly non-flammable hydraulic fluids HFA, HFB, HFC acc. to VDMA 24317
The V-packing set KDS01 1/0 is a sealing system with one V-packing made of NBR fabric. The combination KDS01 is a sealing system which is pressure supported and attains very low leakage rates.
The installation must be done in open installation housings, i.e. the piston must be split so that the sealing sets can be installed deformation-free. The elements are always installed separately in the seal housing. For applications in double acting cylinders, it is important that the V-packing sets have axial space (L>H).
For piston sealing, the combination 1/0 is used as a V-packing set, as a rule. If required, all other combinations are possible. For special applications, individual V-packings can be supplied made of different materials e.g. the support rings made of a PTFE-Bronze compound.