Product group: Rod seal
Design: NI asymmetrical u-ring with inner main sealing lip
Profile no.: 30
Specification: E suitable for one-sided pressure load
Seal material: TPU 95 3401
Operational application limits
Pressure (MPa): ≤ 40
Temperature (°C): -40 to +100
Running speed (m/s): ≤ 0.5
Hydraulic oils acc. to DIN 51524 Part 1 – 3, lubricating oils, mineral oil based lubricating greases, highly non-flammable hydraulic fluids HFA, HFB, HFC acc. to VDMA 24317
The SNI30 u-ring is a single-acting rod seal with an asymmetrical design. Due to the synergy of the geometry and material, this design is exceptionally well-suited for extreme loads.
U-rings can be installed in both solid and split housings. Please note for a solid housing application a minimum width is necessary and suitable installation tool may be required.
Seals made of TPU are very robust and are particularly well-suited for applications in mobile hydraulics and especially in the area of earth moving machines.