Product group: Rod seal
Design: N symmetrical u-ring
Profile no.: 21
Specification: E suitable for one-sided pressure load
Seal material: NBR 90
Operational application limits
Pressure (MPa): ≤ 16
Temperature (°C): -30 to +100
Running speed (m/s): ≤ 0.5
Hydraulic oils acc. to DIN 51524 Part 1 – 3, lubricating oils, mineral oil based lubricating greases, highly non-flammable hydraulic fluids HFA, HFB, HFC acc. to VDMA 24317
The N21 has a symmetrical design which allows it to be used as a piston seal and as a rod seal.
U-rings can be installed in both solid and split housings. Please note for a solid housing application a minimum width is necessary and suitable installation tools may be required.
U-rings made of NBR are primarily used with low pressures as the seal lips are provided with radial pre-stress which is strengthened by the pressure of the system. Apart from applications in hydraulics, this NBR design can also be used in pneumatic applications. For special applications, different materials are also available.